Certifications & Quality marks | Mark Climate Technology

Mark Climate Technology's quality guarantee

Mark Climate Technology strives for unparalleled quality. The production of our climate control systems takes place in our own factories and only takes place in accordance with the best certification methods and quality marks. This allows us to guarantee a constant quality. Together with the years of accumulated knowledge and experience, this gives you the security you desire.

Eurovent

The entire range of Mark AIRSTREAM heat recovery units and air handling units are certified according to the EUROVENT quality mark. This European energy label for air handling units classifies an AHU type on various points based on the European standards NEN-EN 1886 (mechanical properties) and NEN-EN 13053 (nominal values and performance).

To ensure that all suppliers use the same testing method, and above all maintain their quality, EUROVENT carries out a check. In addition, companies are regularly checked whether they still meet the measured report figures. In this way, the customer is always guaranteed of a high-quality product.

RLT Richtline-01

RLT Raumlufttechnische Geräte Herstellerband e.V. logo In addition to the EUROVENT classification, the AIRSTREAM heat recovery units are also certified according to the RLT Richtlinie-01. EUROVENT and RLT are similar organizations that aim to provide a transparent picture of the air handling units offered by the supplier. RLT Richtlinie-01 focuses mainly on the German market.

The energy efficiency class for RLT-approved air handling units is based on the air speed classes defined in DIN EN 13053:2012, the current consumption of the motors and the heat recovery rate of the diagonal heat exchanger. If the specific requirements within a class are met, the certification follows.

The Mark AIRSTREAM has been tested and approved by the TüV Süd and has received the A+ certificate based on the measurements. With this certificate, advisors, end users and installers are assured that they are working with the highest quality ventilation equipment.

ISO 9001:2015

Kiwa ISO 9001 logo Mark Climate Technology has been ISO 9001 certified for 25 years. NEN-EN-ISO 9001:2015 is an international standard that sets requirements for an organisation’s quality management system. The system emphasizes the importance of continuous development and improvement in relation to customer requirements, product and service quality, processes and performance. The quality management system is examined annually by an auditor from KIWA.

By regularly looking critically at our quality system and our processes, the quality we deliver remains of high level. We are therefore very pleased to have again obtained the ISO 9001 certificate.

F-Gas

Kiwa F-gas logo

Installation companies and other companies that carry out maintenance and inspection work on refrigeration equipment, air conditioners or heat pumps must be certified in accordance with BRL 100 ‘Assessment guideline for the certificate f-gases for companies’. Mark Climate Technology has also been certified.

Did you know that the Mark air handling units can be supplied Plug & Play with an integrated heat pump? By using DX heat pumps, it is not only possible to ventilate, but also to cool and heat in a sustainable way. As standard, Mark Climate Technology supplies the heat pumps integrated and tested on the same frame as the heat recovery unit, which is then delivered completely Plug & Play on location.

The heat pumps can also be delivered separately, after which the commissioning takes place on location.